The Accossato Quick Action throttle is CNC machined from Ergal quality Aluminium Alloy.

The kit is supplied with 2 cables, matching clutch hand grip and 3 different inter changeable ratios which gives you the possibility of adapting the throttle to suit the track

The cables are made from materials resistant to wear and are extremely flexible giving this Quick Action a very long service life.

Usually available from stock, bike specific cables may need to be ordered - if this is the case your order may take 7-10 days to dispatch. We will update the status of your order once we have received your order.

Both Pazzo clutch and brake levers are fully adjustable, Stainless steel fasteners and cadmium plated custom made springs, Roll-A-Click Pazzo Racing Lever is a position adjustable lever, The miniature "clicker" lever controls a roller cam assembly, giving riders the ability to change lever position while riding, Brake fade and clutch adjustments can be taken care of easily!

• Pazzo Racing Brake & Clutch Levers Key Features:
• Adjustable on the move
• Great range of adjustment plus 'dog-leg' design for greater comfort
• Easy, direct replacement to standard levers
• Proven on the race track
• Available in variety of colours
• Available as Standard length or 'Shorty' (2 to 3 finger lever 1 ¼ inches shorter than standard)
• Shorty lever is much less likely to get damaged in a crash

Warning: There is no more critical part on your bike than its brakes. If you are unsure how to fit your Pazzo levers, seek advise, As we cannot take responsibility.

Options: Standard length or Short length

Black Levers with either Black, Gold, Silver (Unanodised), Blue, Red, Orange, Green, Titanium Colour adjusters.

Other colours available (£5.00 extra - please contact us) Levers and or adjusters - Gold, Silver (Unanodised), Blue, Red, Orange, Green, Titanium Colour

Please contact us to check availability in your colour/model choice or complete checkout for black with coloured adjusters only and add your requirements in the note area. We will contact you as soon as possible with a delivery date

Mirror Covers by Lightech for the Aprilia RSV4 09-11

Available in Red, Gold, Black, Blue, Silver

Usually available from stock however in the event that your choice needs to be ordered in from Italy please allow 7-10 days for delivery, you will be advised as soon as we have received your order.

Aprilia RSV4 2009-2011

STM's Superbike Slipper Clutch for 1000cc race and sports bikes

STM slipper clutches offer two major advantages; to assist the rider and help prevent damage to the engine and gearbox.
The slipper clutch assists the rider by reducing the effect of engine braking. Engine braking causes the rear wheel to ‘lock up’ and ‘patter’ when braking hard for a corner. A rider that is too aggressive in this situation suffers, because the rear wheel loses contact with the ground, making continued braking and direction change much harder to accomplish.
The STM clutch also helps save the engine and gearbox, again by reducing engine braking. Most motorcycle engines have a rev limiter, to stop the engine exceeding a certain speed considered safe by the manufacturer. This works fine when the engine is under power, but if a rider is approaching a corner, close to the r.p.m. ‘red line’, and then down-shifts, the engine can easily be forced to a speed it was never designed to reach, often with catastrophic results. Additional benefits are realised as the gearbox suffers less abuse for the same reasons, and it is less important for the rider to provide perfectly co-ordinated gear changes

The SCM Quick Action Throttle has been designed to help achieve maximum throttle openings with the minimum of wrist movement hence maximum comfort taiolred to your specific needs. Ideal for riders with limited wrist movement. This enables you to get onto the power faster and gain advantage on the rest of the field!

The Body and Throttle tube is CNC machined Alloy, Black anodised for a Lasting and Quality finish.

Hi Spec, Low friction Throttle cables are included with the kit, these are specific to your motorcycle for a perfect fit.

4 Cams are supplied with each kit designed to suit you and your situation. Even with the most aggressive cam fitted there is plenty of feel in the throttle for accurate throttle positioning exiting a corner, but for the less brave smaller cams are included!! 

Also available in PTFE coated body for an even smoother action.

Please allow up to 7 working days for delivery

Comprising:

DID 520ERV3 Race Chain and Renthal Front and Rear Sprocket in a choice of sizes.

Standard Sprocket Tooth Size for Aprilia RSV4 16 Front - 40 Rear

These frame skidders are available in black. Suitable for the Aprilia V4 Tuono (2011) and Aprilia RSV4R and RSV4R Factory Models.

Utilising the same material as our famous R&G Aero Bobbins, these skidders combine the excellent crash resistance required with the subtle styling a skidder allows.

Aprilia RSV4 Factory and RSV4-R Engine Case Cover Kit - Both Sides

These R&G Racing Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement R&G crash protectors perfectly.

The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?

Suitable for the Aprilia RSV4-R ('09-), RSV4-Factory ('09-) Editions and Tuono V4 ('11-)

This kit includes:
ECC0090BK - Left Hand Side Engine Case Cover
ECC0091BK - Right Hand Side Engine Case Cover

Kit Saving: £15.99

Aprilia RSV4 Factory and RSV4-R Left Hand Side Engine Case Cover.

These R&G Racing Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement R&G crash protectors perfectly.

The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?

This frame insert is suitable for the Aprilia RSV4 and fits to both sides of the bike.

Please note that this product is sold as a single, if you wish to fit them to both sides of the bike, you will need to purchase 2

Fork protectors help to eliminate damage to the front forks during a drop and are suitable for the following bikes:

Aprilia: RSV 4, Factory, Falco, Futura, RSV Mille '98-'03, RSVR '04-, Tuono, Shiver & Dorsoduro 750 '08 models.

Ducati: 600SS, 748, 749, 750SS, 900SS, 916, 996, 996R, 998, 999, 1000DS, Hypermotard 1100, Monster -'06, Monster S4RS '07-, Monster 696 '08, Monster 1100S '09 MTS Multistrada -'06, Multistrada 1100 '07- & Sport Classic 1000S, ST3, ST4 & Desmosedici.

Colour:	Black
Quantity:	Pair
Product Code:	FP0020BK

These crash protectors are suitable for the RSV4/Factory 2009.

These protectors are fitted across the two engine mounts for added strength. The mounting blocks are created from high grade, light weight, anodised aluminium to blend with the polished frame of this magnificent Italian beauty.

Colour:	Black
Fairing Modification:	No Mods
Mounting Position:	Top Engine Mount
Quantity:	Pair
Product Code:	CP0257BL

TRW Black Edition Rearsets RSV4 2009>



High grade foot rest units,

CNC-milled, anodised black and pre-assembled,

individual adjustment options,

reversing shift pattern also possible with no major effort or cost,

extremely light from 700g,

racing foot rests including Teflon bungs. TUV approved.

adjustable 35mm → and 25mm ↑

 

Normal Delivery from 3 to 7 working days



Fitting Notes: Includes Exhaust Mounting



Image for illustration purposes only - item may vary depending on model

Techspec Gripster Tank Grip Pads

Snake Skin – is a 0.125" thin "GRIP PAD" with a low profile diamond grip pattern.
With Snake Skins 0.125" thickness and the rubber padding properties, one will not only feel and excellent GRIP into the tank, less pressure on your wrists, elbows and shoulders, but could also notice a reduction in shock and vibration from the bike and road. TechSpec's Snake Skin, grip pads are an excellent product for all riders and uses TechSpec's personal "Releasable/Reusable adhesive".

• Increase and maintain accurate control of weight and body position
• Eliminate sliding up and into the tank, especially with passengers
• Improve riding style
• Decrease overall body fatigue
• Improve weight adjustment of body and bike while in motion
• Protect a highly visible area of the tank
• Improve re-sale value
• Provide all the benefits of a grip material without shredding leathers

Please allow 2-3 days for delivery

MWR High Efficiency Air Filter Aprilia RSV4 R/ Factory

This new revolutionary High Efficient Airfilter is designed to reduce intake noise and yet more power to deliver.

The incoming turbulant air is stablelized and accelerated around the edge of the airsplitter plate , this means greater volume evenly distributed throughout the airbox.

All inlets will get with this High Efficient Airfilter the same quantity of air, regardless of speed on the motorcycle and the wind direction on the track .

This new design of airfilter has shown a reduction of up to 8db of intake noise in testing as well as an increase in power.

MotoGP,WSBK,WSS and Moto2 are already using this technology.

Please note:

• Remapping the ECU or the Power Commander is highly recommended.
• Only use MWR cleaner and airfilter oil
• Clean and re-oil at least once a year.
  
  INSTALLATION : The airsplitter plate always in direction of the engine intakes

Renthal Rear Chainwheels have the following features:

• Renthal Ultralight™ rear chainwheels are 66% lighter than steel.
• Precision CNC manufactured to extremely tight tolerances.
• High strength specially enhanced 7075 T6 aluminium alloy.
• Computer aided Ultralight™ design gives the maximum reduction of unsprung weight at the rear wheel, to give maximum power transfer.

 Alternative Rear Sprockets for the Aprilia RSV4 41 tooth

Renthal Ultralight Front Chainwheel 16T (OE) 475U-525-16

Renthal Front Chainwheels are simply the finest front chainwheel on the market today.

Renthal Front Chainwheels feature: Specially developed Nickel-Chrome-Molybdenum steel, case hardened core refined to give the ultimate combination of strength and hardness

Alternative Front Sprocket 15T (one down)

Ref: SBS 841DC to fit the following models;

SBS No	Make	Model	CCM	Modelname	Year
841	APRILIA	RSV4	1000		2009 -
841	BMW		1200	HP2 Sport	2008 -
841	DUCATI		1098	(Rad. cal)	2007 - 2008
841	DUCATI		1098	R (Rad.cal)	2008 -
841	DUCATI		1098	R Bayliss LE (Rad.cal)	2009 -
841	DUCATI		1098	S (Rad. cal)	2007 - 2008
841	DUCATI		1198	(Rad.cal)	2009 -
841	DUCATI		1198	S (Rad.cal)	2009 -
841	DUCATI	D16RR	990	Desmosedici RR	2007 -
841	KTM	RC8	1190		2008 -
841	KTM	RC8	1190	R	2009 -
841	MV AGUSTA		1078	F4 CC	2008 -
841	MV AGUSTA		1078	F4 RR	2008 -

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”. World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:

• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite
• High friction level and progressive brake feel
• High thermal stability
• Consistent brake performance and brake lever position
• Low pad wear
• Rotor friendly due to transfer film generated on disc surface
• Available for the majority of new Superstock, Supersport and racing brake calipers
• Recommended for top level international and national championship road racing

For race use only

Listing is for one set of pads only, for a full set you will need to purchase 2 sets, one set per caliper

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”. World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:

• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite
• High friction level and progressive brake feel
• High thermal stability
• Consistent brake performance and brake lever position
• Low pad wear
• Rotor friendly due to transfer film generated on disc surface
• Available for the majority of new Superstock, Supersport and racing brake calipers
• Recommended for top level international and national championship road racing

For race use only

Listing is for one set of pads only, for a full set you will need to purchase 2 sets, one set per caliper

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”. World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:

• Thermal bedding-in and brake fade eliminated by use of DEST technology.
• High initial bite
• High friction level and progressive brake feel
• High thermal stability
• Consistent brake performance and brake lever position
• Low pad wear
• Rotor friendly due to transfer film generated on disc surface
• Available for the majority of new Superstock, Supersport and racing brake calipers
• Recommended for top level international and national championship road racing

For race use only

Listing is for one set of pads only, for a full set you will need to purchase 2 sets, one set per caliper

Race shift  - Yes

These rearsets are probably the best quality and value rearset now on the market. CNC machined, pegs provide excellent grip with a rounded end to the peg. The rearsets have bearings for smooth operation.

Black option normally from stock but please allow up to 2 weeks for delivery, all other colour options 2-3 week delivery.

Image shows Aprilia RSV4 model

Lightech Ajustable Rear Sets with Fixed Peg

Fully adjustable foot peg position for comfort
High quality roller bearings for precise brake & shift lever action
Sleek race-inspired design
Standard & reverse shifting possible unless otherwise stated for you model
CNC machined & anodized in Black
All rearset spare parts also available

Normally shipped within 3 working days, if your item is to be shipped direct from Italy you may have to allow up to 14 days. We will update you with an estimated delivery date as soon as we receive your order.

Image for illustration purposes only, designs may vary dependant upon model for more information please check out www.lightech.it

]]> sales@bifracing.co.uk (C Mienes) http://www.bifracing.co.uk/shop/double-bubble-screens-double-bubble-to-fit-aprilia-c-332_333_335_369/double-bubble-screen-to-fit-rsv4-and-factory-p-4660 Tue, 02 Nov 2010 13:23:32 +0000 51.01 GBP http://www.bifracing.co.uk/shop/browse-by-track-bike-aprilia-rsv4-c-277_266/sintered-race-front-brake-pads-aprilia-rsv4-sbs-841-p-986 http://www.bifracing.co.uk/shop/product_reviews/sintered-race-front-brake-pads-aprilia-rsv4-sbs-841-p-986

SBS Scandinavian Brake Systems

Ref: SBS 841RS to fit the following models;

SBS No	Make	Model	CCM	Modelname
841	APRILIA	RSV4	1000
841	BMW		1200	HP2 Sport
841	DUCATI		1098	(Rad. cal)
841	DUCATI		1098	R (Rad.cal)
841	DUCATI		1098	R Bayliss LE (Rad.cal)
841	DUCATI		1098	S (Rad. cal)
841	DUCATI		1198	(Rad.cal)
841	DUCATI		1198	S (Rad.cal)
841	DUCATI	D16RR	990	Desmosedici RR
841	KTM	RC8	1190
841	KTM	RC8	1190	R
841	MV AGUSTA		1078	F4 CC
841	MV AGUSTA		1078	F4 RR

The RS lining provides ultimate stopping power. Due to its perfect characteristics in regards to initial bite, feel and performance at both hot and cold conditions.
RS has been used successfully for Supersport 600 and Superbike racing for national and club level racing or for track day riders.

Characteristics:

The RS lining provides ultimate stopping power. Due to its perfect characteristics in regards to initial bite, feel and performance at both hot and cold conditions.
RS has been used successfully for Supersport 600 and Superbike racing for national and club level racing or for track day riders.

Characteristics:

The RS lining provides ultimate stopping power. Due to its perfect characteristics in regards to initial bite, feel and performance at both hot and cold conditions.
RS has been used successfully for Supersport 600 and Superbike racing for national and club level racing or for track day riders.

Characteristics:

Aprilia RSV4 Factory and RSV4-R Left Hand Side Engine Case Cover.

These R&G Racing Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement R&G crash protectors perfectly.

The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?

HM Quickshifter Plus. For all Aprilia RSV4 models, road and race shift

Built-in Intelligent Ignition Controller

The loom connects straight to your existing plug top coils, so unlike many other quickshifters on the market there is NO NEED for splicing of any wires. The loom supplied fits straight to your bikes existing connectors.

The RSV4 normally has a lever bolted directly to the selector shaft on the engine, so this shifter can only be used if you already have after market rear sets with a linkage rod.